Electrical discharge machine works by using the erosion caused by the impulse discharge between the electrode and the conductive material, which has been used in the production of dies....
The amplifier is the servo drive for driving and controlling servo valves and proportional valves. It can realize high accuracy control of all kinds of valves. Servo power amplifier can be composed with other hydraulic systems and measuring transducers into an electro-hydraulic servo system, such as...
Electro hydraulic servo valve can measure the hydraulic oil according to input signal, then to control position, speed, pressure or force in the electro hydraulic systems (generally the pistons and plungers)....
Electro hydraulic proportional valve is a hydraulic component, which can translate electrical signal to displacement signal by an analog electric-machinery converter. When this valve acts, the electric-machinery converter will response the input signal to move the valve core, change the opening size...
Grease injection valve is an equipment that can output high pressure medium quantitatively. It is the most important part of the quantitative filling machine, which can fill many different kinds of high viscosity oil such as lithium grease, calcium soap grease, other semisolid oil and adhesives. Qua...
Single axis CNC EDM machine uses a single axis (Z-axis) with auto-feeding control system (including servo feed system and parameters control system), other axes are manual control axis (X-axis and Y-axis)....
With auto-feeding control system (including servo feed system and parameters control system), three axis CNC EDM machine has wonderful performance on automation and control precision. It is widely used in the field of mould production for electronic component, automation, information and communicat...
CNC EDM grinder is a machine that can produce PCD cutters through grinding. With 4 CNC controlled axes and 2 manual axes, which is used for the complete processing of PCD tipped tools....
Typical Applications | Gas Chromatography, Ventilators, Anesthesia Delivery, Mass Flow Control, Oxygen Conservers & Concentrators, Anaesthesia Delivery & Monitors, Pressure & Flow Control, Mass Flow Control |
Performance: Flow Rate Range | 0 to 56 slpm |
Performance: Pressure Range | 0 to 150 psi |
Orifice Sizes Available | 0.010, 0.020, 0.030, 0.040, 0.050, and 0.065" (0.25, 0.51, 0.76, 1.02, 1.27, and 1.65mm) |
Thermal Compensation | Thermally Compensated |
Dimensions: | 0.63 in (16.51mm) |
Dimensions: | 0.67 in (17.02mm) |
Dimensions: Length | 1.79 in (45.34mm) |
Wetted Materials: Body/Stem Base | 360 HO2 Brass, 430 FR Stainless Steel |
Wetted Materials: Seals (Elastomer) | FKM, FFKM |
All Other Wetted Materials | 300 Series Stainless Steel |
Control Method | Current or Voltage |
Cleanliness | Analytically Clean |
Valve Configuration Type | 2 Way Normally Closed |
Life (# cycles) | Up to 100 Million Cycles |
Pneumatic Connection Options | Manifold Mount, Manifold Mount w/ Screens, Barbed, 10-32 threaded |
Electrical Connection Options | 18" Wire Leads, 4 Pin PC Connection, Quick Spade |
Voltage Configurations Available | 6.5 VDC, 8 VDC, 11.5 VDC, 13.5 VDC, 20 VDC and 29VDC |
Leak Rate | <0.2 sccm of Helium |
Power Consumption (W) | 2.0 Watts Maximum |
Weight (lbs) | 2.2 oz (62.9g) |
Multi-axis servo amplifier from the DIAS Drive 1000 series can control up to 6 motors. In addition to the housing, the drive regulators also share the controller, intermediate circuit and heat sink. Not only can the construction volume be reduced and the stability increased, the equipment costs ar...
Tag: Multi-axis Servo Drive | Multi-axis Servo Controller | Multi-axis Servo Amplifier for Motor | Multi-axis AC servo-amplifier
The pilot operated proportional directional control valve works with barometric feedback of the main stage to the pressure reducing pilot valve. The pilot control pressure of 25 bar allows high flow rates at maximum stability....
Tag: Pilot Operated Proportional Directional Valve | Pilot Operated Proportional Valve